Language

ดังนี้

Meter series

หน้าแรก » ผลิตภัณฑ์ » Meter series

Meter series

  • /img/mj_vr440_dual_channel_intelligent_rotation_monitor.jpg
  • /upfile/2018/01/26/20180126133138_768.png
  • /upfile/2018/01/26/20180126133156_922.png
  • /upfile/2018/01/26/20180126133210_872.png
  • /upfile/2018/01/26/20180126133223_176.png
  • /upfile/2018/01/26/20180126133244_897.png
  • /upfile/2018/01/26/20180126133255_620.png
  • /upfile/2018/01/26/20180126133312_518.png
  • /upfile/2018/01/26/20180126133329_728.png

MJ-VR440 Dual Channel intelligent rotation Monitor

MJ-VR440Dual Channel intelligent rotation Monitor (microcomputer speed measurement instrument) is a rotational digital single chip microprocessor primary indicator. Using the latest color LCD touch screen as user interface, provides users with a full graphical interface work, and can be requested by the user, using Chinese or English interface. All parameters can be displayed through the touch screen menu to adjust settings. While in order to prevent arbitrary action from unrelated persons, we set a password protection for parameter setting section. This product can be used with hall effect speed sensor, photoelectric speed sensor and proximity switch (square wave output ) or a magnetic speed sensor (sine wave output). Supporting the use of used to measure the rotation speed, linear and angular velocities, while providing two-way 4ma - 20ma current standard signal output. The display device can be widely used in chemical industry, metallurgy, energy, light industry, textile, electronics, machinery, automobile and other industries. The following are described in terms of performance and operational lines and so on. In order to use this display device more effective,please read it carefully.

ติดต่อเรา >>
  • ลักษณะ
  • ข้อมูลจำเพาะ
  • Parameter selection
  • ลักษณะ
  • การสอบสวน

MJ-VR440Dual Channel intelligent rotation Monitor (microcomputer speed measurement instrument) is a rotational digital single chip microprocessor primary indicator. Using the latest color LCD touch screen as user interface, provides users with a full graphical interface work, and can be requested by the user, using Chinese or English interface. All parameters can be displayed through the touch screen menu to adjust settings. While in order to prevent arbitrary action from unrelated persons, we set a password protection for parameter setting section. This product can be used with hall effect speed sensor, photoelectric speed sensor and proximity switch (square wave output ) or a magnetic speed sensor (sine wave output). Supporting the use of used to measure the rotation speed, linear and angular velocities, while providing two-way 4ma - 20ma current standard signal output. The display device can be widely used in chemical industry, metallurgy, energy, light industry, textile, electronics, machinery, automobile and other industries. The following are described in terms of performance and operational lines and so on. In order to use this display device more effective,please read it carefully.

1.Connect power:

Please connect the display device to power before using it .The system will start to operation after 5 seconds and the display shown in Figure 3:

รูป 3

2. Parameter settings:

①Touch "SET" button, enter the password input operation interface, see Figure 4

รูป 4

System password :6808

Finished entering the password, press "OK button", if the password is correct, you can enter the parameter setting interface, shown in Figure 5:


รูป 5

White section shows the initial value of each parameter, touch the white section, you can select the item you want to set the parameters, and then enter the parameter setting value interface, see Figure 6:

รูป 6

Please enter the correct value. If the input is complete, press "OK button". If there are other parameters need to be modified, repeat the previous operation, modify the relevant parameters.Please remember to touch “Save”(in the top right of the screen) in Figure 5, then the parameters are modified.

After pressing "Save", the system saves the new value and return to work status.

III Connection Wiring (Reference only)

Note: The rear panel input and output terminals, please refer to the Figure 7.

UP:

ลง:

รูป 7

1. Coefficient setting range : 0.001 -99999 (Touch screen set)

2. Signal input :YD60/YD9800/YD62

3. Input signal frequency: 0.4Hz-20KHz

4. Input signal amplitude: Sine wave 0.3V-10V (Effective value)

Square wave 1V-5V (high level)

0V-1V (low level)

5. Measurement accuracy: 0.02

6. Power supply : AC220V ± 30%, 50Hz /60Hz

7. Working environment: Temperature -20 ℃ -70 ℃

Relative humidity ≤ 85%

Pressure(86-106) Kpa

8. Dimension: 85mm × 165mm × 275mm

9. Weight: about 1.0kg

10.Hole size:73mm× 152mm

MJ-VR440-A□□-B□□

เมนู
G|translate Your license is inactive or expired, please subscribe again!