Limba

URMEAZĂ:

Senzor de viteză sau de accelerație

Acasă » Produse » Senzor de viteză sau de accelerație

Senzor de viteză sau de accelerație

  • /img/mj_vr9400_explosion_proof_vibration_sensor.jpg

MJ-VR9400 Senzor de vibrații rezistent la explozie

Senzorul de viteză de vibrație 4-20mA rezistent la explozii se poate conecta la locul de muncă al sistemului PLC.

Certificare IEC 60079-10 împotriva exploziei

MJ-VR9400 Integrated Explosion-proof Vibration Transmitter is mainly installed on the bearing cover of various rotating machinery (such as steam turbine, compressor, fan and pump etc.), capable of measuring the vibration velocity or vibration amplitude. The moving coil cuts magnetic lines to generate voltage, and the transmitter convert it to current output. The transmitter has the advantages of small size, water proof, stable performance, easy installation and so on.

Contactați-ne >>
  • Descriere
  • Specificații
  • Selectarea parametrilor
  • Caracteristică
  • Anchetă

Senzorul de viteză de vibrație 4-20mA rezistent la explozii se poate conecta la locul de muncă al sistemului PLC.

Certificare IEC 60079-10 împotriva exploziei

MJ-VR9400 Integrated Explosion-proof Vibration Transmitter is mainly installed on the bearing cover of various rotating machinery (such as steam turbine, compressor, fan and pump etc.), capable of measuring the vibration velocity or vibration amplitude. The moving coil cuts magnetic lines to generate voltage, and the transmitter convert it to current output. The transmitter has the advantages of small size, water proof, stable performance, easy installation and so on.

● Measuring range

Vibration amplitude: *0~200um; 0~500um; 0~1000um

Vibration intensity: 0~10.0mm/s; *0~20.0mm/s; 0~50.0mm / s

(* is the default range)

● Frequency response: 5 ~ 500 Hz

● Natural frequency of vibration: 10Hz

● Output current: 4~20mA

● Output impedance: ≤500Ω

● Working voltage: DC24V

● Connecting mode: two wires (DC24V Power and 4 ~ 20mA use 2 wires) or three wires ( ground wire, power wire and output wire )

● Maximum acceleration: 10g

● Measurement direction: horizontal or vertical

● Environmental conditions: temperature is -40℃~85℃, relative humidity ≤90%

● Dimensions: aluminum alloy, 72×132mm

● Weight: about 450g

● Mounting screw: M20 x 1.5 x 20mm ( length)

Mounting position: vertical or horizontal install on the measured vibration point, fix it by M20 x 1.5 x 20 screw on the bottom of the transmitter.

MJ-VR9400-A□

Measuring range: A□

1 0~200um; 2 0~500um; 3 0~1000um ( Vibration amplitude ); 4 0~10.0mm/s;

5 0~20.0mm/s; 6 0~50.0mm/s ( Vibration intensity ).

For example: MJ-VR9400-A1 means the measuring range is 0~200um.

Meniu