언어선택

다음 :

미터 시리즈

» 서비스 소개 » 미터 시리즈

미터 시리즈

  • /img/mj_vr420_dual_channelaxial_vibration_monitor.jpg

MJ-VR420 Dual channelaxial vibration monitor

MJ-VR420 Dual channelaxial vibration monitor, with DSP system installed, is a precision intelligent measurement and control instrument, widely used in electric power, petroleum, chemical and other departments. Through the magnetic-electric sensor the instrument can continuously monitor and measure the peak-peak value for the vibration of the steam turbine, wind turbine and other rotating machine. With alarm and shutdown control signal output, equipped with current output and RS485 interface, it can connect with computers and other devices and synchronize with PLC equipments. The Monitor uses an 80 × 160 (mm) common chassis, LED digital display, PVC color mask and light touch keys, it has a European standard resolution of 128*64 on the display with beautiful appearance, novel style, reasonable structure, simple installation, stable performance and reliable quality.

연락처 >>
  • 설명
  • 명세서
  • 파라미터 선택
  • 특색
  • 문의

1 소개

MJ-VR420 Dual channelaxial vibration monitor, with DSP system installed, is a precision intelligent measurement and control instrument, widely used in electric power, petroleum, chemical and other departments. Through the magnetic-electric sensor the instrument can continuously monitor and measure the peak-peak value for the vibration of the steam turbine, wind turbine and other rotating machine. With alarm and shutdown control signal output, equipped with current output and RS485 interface, it can connect with computers and other devices and synchronize with PLC equipments. The Monitor uses an 80 × 160 (mm) common chassis, LED digital display, PVC color mask and light touch keys, it has a European standard resolution of 128*64 on the display with beautiful appearance, novel style, reasonable structure, simple installation, stable performance and reliable quality.

2. Main Functions

1.1 it has two channels, each channel can measure and display the vibration amplitude.

1.2 It has 4 dual channel switching control the signals. Using a miniature high-power relay, the maximum switch voltage is 440VAC / 125VDC, the maximum switch current is 16A, the maximum switch power is 4000VA, mechanical pressure resistance is 10million times. Through the lower limit alarm value setting, the upper limit alarm value setting, the alarm delay setting and the lower limit danger value setting, the upper limit danger value setting, the danger delay setting, relevant action, when the vibration amplitude reaches a preset value, the relay switch enter into working state.

1.3 Multifunction digital keyboard. In the main display interface, press "1" enter 1 channel information display; press "2" enter 2 channel information display; press "3" enter the dual channel display simultaneously; press "M" enter the menu item; press "↑↓" direction keys to change the different display information in the channels; press "." to return.

1.4 Dual 4 ~ 20mA isolation high precision current transmission output, with high precision voltage reference inside, 18 digits precision voltage drive chip, high precision and low drift operational amplifier, guarantee the accuracy of the output reach 0.01%. By the main range lower limit setting and main range upper limit setting of the menu item, divide it into the corresponding current interval of 4 ~ 20mA accurately, so that improves the accuracy of output signal. Calibrate the lower limit and upper limit of current loop by current meter, then demarcate the linearity of 4 ~ 20mA more accurate.

1.5 The device has main range display, percentage display, bar graph display, transmission current display. It is more convenient, fast and accurate for customers to do calibration in the site application.

3.1 MJ-VR420 Intelligent Shaft Vibration Monitor

3.1.1 Signal Input: YD9800(YDYT9800) eddy current displacement sensor or BN3300XL

3.1.2 Range of measurement :0~2000um(can be determined according to users’s demand)

3.1.3 Measurement accuracy: Linear error≤ ± 1% (full scale value)

3.1.4 Display performance: 128*64 Dot LCD display

3.1.5 Frequency Response:0~5000Hz

3.1.6Output current: 4 ~ 20mA (can be adjusted according to users' requirements to 0 ~ 10mA)

3.1.7 Communication Interface:RS485

3.1.8 Alarm Contact Capacity:DC28V 3A AC220V 2A

3.1.9 Working temperature: Temperature: -20 ℃ ~ 70 ℃ Relative humidity: ≤ 85%

3.1.10 Power Supply: Alternating current: 220VAC ± 30% 50Hz /60Hz Power consumption ≤ 20W

3.1.11 Dimension: 80 × 165 × 275mm (H × W × L)

3.1.12 Hole Size: 73× 152 (H × W)

3.1.13Set way:Set the touch

MJ-VR420-A□□-B□□-C□□-D□□

메뉴