Wireless monitoring system get real-time acceleration signal /velocity/displacement signal through wireless monitoring device,wireless data transmission controller get the signal and transfer to industrial control computer through USB, ethernet,wireless vibration monitoring of monitoring software and PMS system count vibration parameters calculation, real-time data display, trend data display, provide historical data management and automatic report function,simultaneously alarm when abnormal or excessive vibration.

Structure of system

1.Key parts

Rotating machinery condition monitoring system was formed by wireless monitoring device, Wireless data transmission controller and supervisory main. Key equipment description is followed：

Wireless vibration temperature transmitter：Mainly responsible for vibration and temperature signal collection. Include one dimensional, three-dimensional high precision acceleration sensor, temperature transmitter, lithium cell, AD collection module, wireless transceiver module and embedded master chip.

2.Wireless vibration sensor node

Wireless data transmission controller: mainly responsible for monitoring data between the host and the wireless monitoring device to upload and release.

3.Wireless data transmission controller

Supervisory main: Mainly responsible for vibration parameters calculation, real-time data display, trend data display, provide historical data management and automatic report function、simultaneously alarm when abnormal or excessive vibration.

4.Supervisory main

MJ-VR260ワイヤレス振動温度システム

構造様式

Vibration signal acquisition：垂直;

周波数範囲：

Acceleration: 10Hz〜5KHz;

Velocity: 10Hz〜1KHz;

Displacement: 10Hz〜1KHz;

Wireless monitoring device

速度

変位;

Acceleration time waveform;

Velocity time waveform;

Displacement time waveform;

Cell voltage, Low voltage alarm;

Temperature measurement -20℃ ～ 100℃，測定精度 ±1%;

Wireless parameter

1 Free band: 433MHz;

2 Communication transmission rate 3.5Kb/s;

3 Effective distance in building>50m（range of visibility）;

4データ取得、set up the collection plan;

Wireless data transfer controller is an important part of the wireless monitoring system of the rotating machinery, and is responsible for the communication between the upper computer software and the lower computer.

Wireless data transmission controller

Wireless data transmission controller

インストール手順

インストール手順：Mounted on vertical column or directly mounted on plane by hoop or bolt, installation height should be as high as possible.

Connection description: connect by 3.2.

インジケータランプ：when the power light is bright and the power supply is normal, the status light is on the communication between the instrument and the lower computer.

Instrument appearance diagram

Light state：

1) Function test of power indicator：When the controller is connected to the power supply, power lights have been shown in the green.

2) Function test of connection indicator：When the controller is connected to the power supply and switchboard, the connecting lamp has been shown green.

3) Function test of communication indicator：When the controller and the lower machine have information transmission, communication indicator bright; after finished light extinguish.

4) Function test of status indicator：

a) When software sends commands to the instrument or instrument upload data, status indicator bright;

b) When the instrument and monitor have information transmission, status indicator bright,after finished light extinguish.

パフォーマンス指標

Wireless data transmission controller