Vibration sensor(transducer)
MJ-VR9600 Smart display vibration transmitter
Blower
Centrifuges
Kompresor
Mesin
generator
motor
pompa
Turbin
Turbochargers
Hubungi Kami >>- Deskripsi
- spesifikasi
- Parameter selection
- ciri
- Enquiry
MJ-VR9600 Smart display vibration transmitter is a velocity vibration transmitter come with 3 digit LCD indicator for local vibration readout. It’s a real vibration monitoring transmitter used for industry, operating temperature reach at -35-+85℃.The transmitter combines a vibration sensor and signal conditioner in a single enclosure. It provides the ideal solution for rotating machinery vibration level and transmit a 4-20mA signal directly to a PLC, DCS, monitor, or other 4-20mA signal input devices, and the alarm could be programmed on the instruments. MJ-VR9600 is directly mounted on the machine case or bearing bush.
Outline dimension drawing of the transmitter:
▲Frequency response: 5HZ-1000Hz ( speed) 10HZ --- 1000Hz(Vibration displacement)
0-2000Hz(Acceleration)
▲Measuring range: 0-200mm/s Smart adjustable(press the button)
0-200um Smart adjustable(press the button)
▲Supply Voltage: +24VDC
▲Resolution ratio:0.05%
▲Overload Current: ≤ 50mA (overheating or short circuit protection)
▲Temperature drift:≤0.1%℃
▲Load resistance: 500 Ω
▲HART features: process variables, analog output, lower limit of analog range, upper limit of analog range, lower limit of sensor range, upper limit of sensor rang, damping analog range etc.
▲Operating temperature: -40 ~ +85 ℃
▲Installation: vertical, horizontal, universal
▲Weight: About 450g
▲Dimensions: φ58mm × 90mm
▲Ip Grade: Ip62
▲Output current:4-20mA
▲Shell material:Stainless steel(Materials can be changed according to user's requirements)
▲Stainless steel shell
▲Alarm relay output
▲485 communication protocol
▲Real-time storage function
▲Wireless 2.4G ZIGBEE industrial local area network transmission
▲Unlimited GPRS network transmission
▲Output voltage DC 0-5
YD9600- A□□ - B□□ - C□□ - D□□ - E□□
3 digital LCD indicator
2-wire non-polarized loop power supply
4-20mA output proportional to the vibration levels
Directly connected to PLC, DCS or other 4-20mA input devices
Different mounting stud available
High & low pass filter available
Wide operating temperature range -40℃~+85℃
Low crossed axis sensitive